B2 SYSTEM ADMINISTRATION - MAILBOXES
198 SYSTEM ADMINISTRATOR'S GUIDE
Notification Setting
The parameters for the Message Waiting Notification - Device feature are set using this
procedure. A maximum of 3 destinations (Device 1, 2, 3) can be specified per mailbox.
•Class of Service programming determines if the Subscriber is able to use this feature.
•If the destination device is a telephone, the subscriber will be called when he has
message(s), and will have a chance to listen to the message(s).
•If the destination device is a beeper, the subscriber will be notified when he has
message(s). If the beeper has a display, it is poss ible to send to it a c allbac k number. The
callback number can be recorded when a caller l eaves a mes sag e. If he does no t leave a
callback number, the System Callbac k No., or the caller's number if it is r eceived thr ough
a telephone company's Caller ID service, will be sent instead.
All Calls
Transfer to
Mailbox
1. Yes
2. No
(No)
If this parameter is set to "Yes," all calls routed to the
extension are automatically forwarded to the extension's
mailbox without ringing the telephone. Forwarding is
accomplished through the Automated Attendant service.
Callers are permitted to leave a message.
Note: When this feature has been set to "Yes", the mailbox
owner's extension does not necessarily need to exist as a
phone extension of the PBX.
To access the proper menu for Message Waiting Notification, follow the menu path
as shown:
System Administration Top Menu - 1 - 1 - 1 - Mailbox No. - 2 - Device No. 1, 2,
or 3.
Table 35
Parameter Value Range
(Default) Description/Function