Panasonic KX-TVS80, KX-TVS50 installation manual 235

		B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
		Table 54
Parameter	Value Range	Description/Function
	(Default)
Numbering	2-5 digits	Specifies the first 1 or 2 digits of the PBX extension
Plan	consisting	numbers. Up to 16 entries can be added to the list. Each
1-16	of 0-9, X	entry can contain 2-5 digits of numeric characters, "0-9",
	(Numbering Plan	and "X" which matches any digit. Extension numbers
	1:1 XX	cannot begin with "0."
	Numbering Plan
	2-16: None)	Examples:
		a) If valid PBX extension numbers are to be specified 101
		through 164 and 201 through 264, specify the numbers
		as follows:
		1XX: Indicates any 3-digit extension number starting
		with "1."
		2XX: Indicates any 3-digit extension number starting
		with "2."
		b) If valid PBX extension numbers are to be specified 400
		through 450 and 3300 through 3399, specify the
		numbers as follows:
		4XX: Indicates any 3-digit extension number starting
		with "4."
		33XX: Indicates any 4-digit extension starting with
		"33."
		Note:
		Auto Configuration will set this parameter automatically.
		The Automated Attendant will dial any 2-5 digit PBX
		extension number (except numbers beginning with "0")
		whether valid or not. If the dialed number is included in the
		numbering plan, the Automated Attendant will
		immediately send it to the PBX without waiting for further
		input. If not included in the plan, the Automated Attendant
		will wait until the dialed number is recognized as an
		extension number, the internal inter-digit timer expires, or
		the caller dials 5 digits.
		If the number for an outgoing call is not found on the
		Numbering Plan, the VPS will consider it an outside
		number. The VPS will then attempt to dial it using the
		"Outgoing Call Setup Sequence."

SYSTEM ADMINISTRATOR'S GUIDE 235