Panasonic KX-TVS50, KX-TVS80 installation manual Installation Steps

2.5INSTALLATION STEPS

2.5INSTALLATION STEPS

The following is an overview of the standard installation process using APT/DPT Integration. When necessary, other sections in this manual have been referenced for more detailed descriptions or instructions.

1.Get a list of current users, their extension numbers, their departments, and the type of systems they use (mailbox, no mailbox, beeper, car phone...).

2.Assess your customers' needs before setting up the system. You will save yourself time later by giving customers what they need up front. Ask the office manager how the VPS will be used. Give examples.

Recommend that your customer use a word processor to log the greetings. You will find these files much more easily than the worksheet pages if you need to make changes down the road.

3.Standard Initialization (For APT/DPT Integration Connection)

a)Program the ports of the PBX for voice processings (See Section 4 INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX).

Program the KX-TA624, the KX-TD1232, the KX-TD816 or the KX-TD308 for Voice Mail integration.

•KX-TA624

•KX-TD816, KX-TD1232, KX-TD308

Program may be performed on-site or at the office.

All memory is stored and will be retained when the unit is powered up as long as the DIP switch has been reset to position [0] prior to turning the unit off.

b)Unplug the power cord of the VPS.

c) Plug station wire(s) from the PBX into VPS (See 2.7 CONNECTIONS).

d) Connect the computer to the VPS with a Null Modem Cable (See 2.8.2 Connecting the RS-232C Cable).

e)Set the DIP switch to position 5.

f)Plug the power cord of the VPS.

g)Wait until the "warning" appears on the screen.

h)Set the DIP switch back to position 0.

CAUTION

If the DIP switch is not reset to position 0 after initialization, all programming will be lost when the voice processor loses power!

30 INSTALLATION