A1 SYSTEM FEATURES
178 SYSTEM FEATURES
Intercom Paging
(APT/DPT
Integration Only)
permits callers to page subscribers by PBX
paging (there are different kinds of PBX
paging, and these can be specified by VPS
programming) when the subscribers have set
Intercom Paging for Call Transfer or when
the subscribers have set Intercom Paging for
Incomplete Call Handling. The caller is
briefly placed on hold while the VPS
announces the page and until the subscriber
answers the page. The subscriber can answer
the page from any extension using the paging
answer code; this code is specified in the PBX
User Manual. For a Caller ID Caller, if his
name has been recorded for the Caller Name
Announcement feature, the name will be
announced at the end of the page. If the
caller's name has been recorded for both the
System and Personal Caller Name
Announcement, the VPS will use the personal
caller name.
To utilize this feature, follow the procedure
below.
1)
Go to the System Administration Top Menu,
and type 1-2 (Program - Class of Service) and
COS No. (1-62). Select an Intercom Paging
Group (1-9) for this COS. If set to Group 9,
the Intercom Paging feature is activated for
all groups.
2)
From the System Administration Top Menu,
type 1-5-7-7 (Program - System Parameter
Setting - Others - Intercom Paging
Parameters). Adjust the "No Answer Time for
Intercom Paging" to your preference (the
default is 5 s). For the Intercom Paging Group
you selected in Step 1, set the Intercom
Paging access code in "Paging Code for
Group 1-8" and "Paging Code for All
Groups". For example, the access code for
external paging by a KX-TA624 PBX is 34.
• See 4.1 GUIDELINES FOR
DIGITAL INTEGRATION.
• See "Intercom Paging (1-5-7-7)"
in 5.2.2 Custom Service
Features.
• See "Intercom Paging Group" in
Table 37 in B3 SYSTEM
ADMINISTRATION -
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See "Other Parameters -
Intercom Paging Parameter" in
B6.7 Other Parameters.
• See "Intercom Paging" in
Glossary.
Table 32
FEATURE DESCRIPTION REFERENCE