Panasonic KX-TVS50, KX-TVS80 installation manual Operators Parameters Day Mode Operator, 214

B5 SYSTEM ADMINISTRATION - SERVICE SETTINGS

To select Operator's Parameters, follow the menu path as shown:

System Administration Top Menu - 1 - 4 - 1 - 2

Operator's Parameters - Day Mode - Operator 1

This parameter is used to enable or disable the Operator Service. It specifies Operator 1's extension and the treatment of the calls transferred to that extension. The assigned extension number for Operator 1 in the Day Mode will be for the Message Manager. When Operator service is enabled, operator-seeking calls are first transferred to Operator 1's extension.

To select Operator Parameters - Day Mode - Operator 1, follow the menu path as shown:

System Administration Top Menu - 1 - 4 - 1 - 2 - 1 - 1

		Table 41
Parameter	Value Range	Description/Function
	(Default)
Operator	1. Disable	Used to turn the Operator Service feature on or off.
Service	2. Enable
	(Enable)	Note: All no-DTMF-input calls in Automated Attendant
		Service are transferred to the General Delivery Mailbox
		when the Operator Service is disabled.
Operator's	1-5 digits	Used to select the extension number for Operator 1.
Extension	(0)
		Note 1: The default setting (0) cannot be used with the
		Message Waiting Notification - Lamp feature. An
		extension number must be assigned that is included in the
		Extension Numbering Plan.
		Note 2: The extension number must be an unassigned one.
Operator's	2-5 digits	Callers to Operator 1 are prompted to leave a message in
Mailbox No.	(998)	this mailbox depending upon how the Busy Coverage or
		No Answer Coverage modes are set.

214 SYSTEM ADMINISTRATOR'S GUIDE