Panasonic KX-TVS50, KX-TVS80 Two-Way Transfer into Mailbox, Two-Way Transfer Button Assignment

4.4COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES

For KX-TD series

Press the PROGRAM button or lift the handset.

7.Repeat these steps for each telephone.

Conditions: This button must be a CO or DSS/BLF button to be

programed as a TWR button. When all Voice Mail ports are busy and this key is pressed, the user will hear reorder tone.

4.4.11Two-Way Transfer into Mailbox

This feature allows an extension users to record a conversation into another person's mailbox by pressing the Two-Way Transfer (TWT) button followed by the mailbox number. This is commonly used by a person who is taking a detailed message for someone else and wants the message recorded in the mailbox at the same time.

4.4.12Two-Way Transfer Button Assignment

For the Two-Way Transfer feature to work at an extension, the extension must have a TWT button on it. This key must be either a DSS/BLF or CO key (must have a lamp). Follow the procedure below to assign a TWT button on an extension. (This is a station level program and should be done at each individual phone.)

1.Enter Station Programming:

For KX-TA624

With the phone on-hook, Set the MEMORY switch to "PROGRAM". (Display changes to PITS-PGM Mode.)

For KX-TD series

a.With the phone on-hook, Press the PROGRAM button.

b.Dial [99]. (Display changes to PT-PGM Mode.)

2.Press the desired FLEXIBLE (CO or DSS/BLF) button that you want to assign as the TWT button.

3.Press [91].

Screen output: 2WAY-TRANS:

4.Enter a Voice Mail extension number. Screen output: 2WAY-TRANS: _ _ _

(_ _ _ = The extension number you entered).

5.Press STORE.

6.Exit the program mode:

For KX-TA624

Set the MEMORY switch to "SET".

For KX-TD series

Press the PROGRAM button or lift the handset.

7.Repeat these steps for each telephone.

90 INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX