Panasonic KX-TVS80, KX-TVS50 installation manual 207

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS

			Table 37
Parameter		Value Range	Description/Function
		(Default)
Device	1.	Yes	When this parameter has been set to "Yes" and when
Notification for	2.	No	unplayed messages remain, the system calls the
Unreceived	(No)		appropriate device in numerical order until all unplayed
Message			messages are received.
Authorization	1.	Yes	When set to "Yes", Subscribers are able to utilize the
for External	2.	No	External Message Delivery feature. The sub-parameter
Message	(No)		to be set is Prompt Mode. If set to "No", sub-parameter
Delivery			cannot be assigned.
Prompt Mode	1.	System	Specifies the language to be used for voice prompts.
	2.	User 1
	3.	User 2
	4.	Selective
	(User 1)
Authorization	1.	Yes	When set to "Yes," messages that have not been accessed
for Auto	2.	No	for a specific length of time are forwarded automatically
Forwarding	(No)		to another mailbox. The sub-parameters to be set for this
			feature include Mailbox Number, Delay Time, and
			Forwarding Mode. If set to "No", sub-parameters cannot
			be assigned.
Mailbox		2-5 digits	Specifies the mailbox where forwarded messages are to
Number		(None)	be sent.
			Note: System Group Distribution List numbers, and
			mailbox numbers for System Manager and Message
			Manager cannot be used for this parameter.
Delay Time		(h) (min)	Specifies the length of time in hours and minutes that the
	00:05 to 99:59		system must wait before forwarding messages that have
		(00:30)	not been retrieved. The maximum delay time is 99 h, 59
			min.
			Note: The delay time must be less than the New Message
			Retention Time, or else messages will be deleted before
			being forwarded.
Forwarding	1.	Copy	Specifies if forwarded messages are to be retained in the
Mode	2.	Move	original mailbox. When set to "Copy," a copy of the
	(Move)		message is retained in the original mailbox after
			forwarding. When set to "Move," messages are
			forwarded to the receiving mailbox and are not retained
			at the original location.

SYSTEM ADMINISTRATOR'S GUIDE 207