Panasonic KX-TVS80 KX-TA624 Extension KX-TVS50/80 VPS1, KX-TVS50/80 VPS2 Port Extension

4.2CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TA624

CAUTION

When 2 VPSs are connected to the KX-TA624, the following 2 procedures should be done to make the VPSs work correctly.

1.Delete a mailbox in either VPS so that each extension has only ONE MAILBOX. After Auto Configuration has been executed, an extension has a mailbox in both VPS1 and VPS2. However each extension can have a maximum of 1 mailbox in

either VPS. To delete a mailbox, Type [D] (Delete) in the "Make (Make/Delete)" field (see "Step 4 Creating Mailboxes" in 5.1.3 Starting the Quick Setup).

The extension should assign a Voice Mail extension from the VPS which contains its mailbox as the destination for Call Forwarding and Voice Mail Transfer. DO NOT assign a Voice Mail extension from the other VPS. For example, if jack 06 (extension 106) has its mailbox in the VPS1, assign extension 107 or 108 as the destination, not extension 115 or 116 (see diagram below).

2.Change the extension numbers of both VPS port 1 and 2 for VPS2 from 107 and

108 to 115 and 116 (see "Extension Number of VPS Port 1" and "Extension Number of VPS Prot 2" in Table 67 in B7.3 PBX Interface Parameters).

KX-TA624

6

7

8

15 16

Extension 106

KX-TVS50/80 (VPS1)

Mailbox for Extension 106

KX-TVS50/80 (VPS2)

Port 1

Extension 107

Port 2

Extension 108

Port 1

Extension 115

Port 2

Extension 116

TEST: Press the INTERCOM button and then [107]. If the VPS answers, you have an APT connection.

Set the DIP switch to position 0 after initialization is complete.

The required programming is complete and the VPS and KX-TA624 should be able to communicate through Digital Integration.

When running the Quick Setup command (Section 5 CUSTOMIZING THE SYSTEM) from the VPS, the PBX transmits the station information automatically. This saves time when programming the VPS.

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 71