Panasonic KX-TVS80, KX-TVS50 installation manual Other Parameters Message Waiting Notification, 237

		B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
		Table 55
Parameter	Value Range	Description/Function
	(Default)
Outgoing Call	Up to 12 digits	Specifies the sequence of codes used by the VPS when
Setup	consisting of	calling an outside line. Up to 12 digits can be set. The
Sequence	0-9, , #, F, R, S, T,	default value is "T." "T" indicates that the system will
	W	dial the outside phone number only after detecting a
	(T)	dial tone.
		Example:
		9W = (9) - 1-s wait - dial outside phone number. "9" is
		the CO line access number.

F: Hook Flash

R:Ringback Tone Detection

S:Silence Detection

T:Dial Tone Detection

W: Wait for 1 s

1-9, 0,, #: Dial Codes

Other Parameters - Message Waiting Notification

The following parameters are used to control the handling of message waiting notification calls.

To select the Message Waiting Notification Parameter, follow the menu path as shown:

System Administration Top Menu - 1 - 5 - 7 - 3

		Table 56
Parameter	Value Range	Description/Function
	(Default)
Outgoing Call	Port No.	Specifies the port numbers used for the Message Waiting
Ports	(1, 2)	Notification Device feature. The VPS makes outgoing
		calls using the port specified in this field. At least 1 port
		must be specified.

SYSTEM ADMINISTRATOR'S GUIDE 237