Panasonic KX-TVS80, KX-TVS50 installation manual Other Parameters Fax Management, 243

			B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
			Table 60
Parameter	Value Range		Description/Function
	(Default)
Paging Code	Up to 12 digits		Specifies the intercom paging access code required by
for Group 1-8	consisting of		the PBX.
	0-9, ,# for each
Paging Code
	group		Note: The Intercom Paging Group Number available
for All Groups
	(Group 1-8:		for each Subscriber is determined on a COS-by-COS
	331-338		basis.
	All Groups
	(Group 9): 33	)

Other Parameters - Fax Management

The VPS can be programmed to automatically transfer incoming fax calls to a fax extension. A maximum of 2 fax extensions can be specified as the destination for the Automatic Fax Transfer. If the main fax extension is not available to receive a fax, the VPS will transfer the fax transmission to the alternate fax extension.

To select Fax Management, follow the menu path as shown:

System Administration Top Menu - 1 - 5 - 7 - 8

		Table 61
Parameter	Value Range	Description/Function
	(Default)
Automatic	1: Disable	Used to enable or disable the Automatic Transfer of
Transfer of	2: Enable	Incoming Fax Call Service.
Incoming Fax	(Disable)
Call		Note: Automatic detection works for only the first 30s.
Main Fax	2-5 digits	Specifies the main fax extension number.
Extension No.	(None)
Alternate Fax	2-5 digits	Specifies the backup fax extension number used when the
Extension No.	(None)	main fax extension is busy or if there is no answer within
		the specified "Fax No Answer Time." When either of
		these situations occurs, the VPS transfers the fax call to
		the backup extension.

SYSTEM ADMINISTRATOR'S GUIDE 243