Panasonic KX-TVS80, KX-TVS50 installation manual On-line Set Onln, Set Password Pass, 135

7.2 UTILITY COMMANDS

Type OFLN, then Press RETURN. If no VPS ports are in use, the VPS will immediately suspend the call progressing service.

$ OFLN

** OFF LINE MODE **

If any VPS port is in use, the VPS will display the following warning:

*** Now line is used!! *** <WAIT>

The VPS will be in the Off-Line Mode when the following message is displayed.

** OFF LINE MODE **

7.2.2On-line Set (ONLN)

The ONLN command is used to place the VPS in the Call Progressing Mode.

Type ONLN, then Press RETURN.

$ ONLN

** ON LINE MODE **

7.2.3Set Password (PASS)

The PASS command is used to create, change and clear system passwords. Valid passwords are created using up to 8 characters; any alphanumeric character, [ (space)], [.] and [_] can be used.

1.Type PASS, then Press RETURN.

$ PASS

1:Administrator Password 2: System Reset/Clear Password :=

2.To create a password or change an existing password, go to Step 3. To clear a password, go to Step 4.

3.To create a password or change an existing password:

a)Type [1] or [2]

Maximum 8 characters

NEW PASSWORD : =

Note

When you press [2] to change the System Reset/Clear password you should type the current (OLD) password before entering a new one.

b)Type the password.

SYSTEM MAINTENANCE AND TROUBLESHOOTING 135