7.2 UTILITY COMMANDS

[4]-Dept Dial:

Department Dialing menu will play when the "4" is

 

pressed.

7.2.12Custom Service Menu Access Count Clear (CCLR)

Each Custom Service has an access counter that counts the number of times the service has been accessed. This command clears this counter.

Type CCLR, Press Space, and Enter Custom Service Menu (1-100), then Press RETURN.

$ CCLR 20

Custom Menu <20> Access Counter Cleared !!

Note

Type CCLR 0 to clear the access counters of all Custom Services.

7.2.13Message Waiting Lamp Retry Times (MWL)

This command is used to specify the number of times the VPS will attempt to turn on the Message Waiting Lamp of the called extension. This setting is required when a PBX other than the Panasonic KX-T series telephone system is used.

$ MWL

Current Setting of M.W.L. Retry Count is 1 Enter M.W.L. Retry Count (1-3) =

Note

This setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes."

7.2.14Setting Minimum Recording Length (MRL)

This command is used to specify the minimum message recording length (0-3 s). Messages shorter than this setting are discarded from the mailbox.

Note

The minimum recording length can only be set using this command.

1.Type MRL, then Press RETURN.

SYSTEM MAINTENANCE AND TROUBLESHOOTING

145

Page 145
Image 145
Panasonic KX-TVS80, KX-TVS50 Custom Service Menu Access Count Clear Cclr, Message Waiting Lamp Retry Times MWL, 145