Panasonic KX-TVS50 Inband Signaling Parameters, 252, System Administration Top Menu 1 6 3

B7 SYSTEM ADMINISTRATION - HARDWARE SETTINGS

		Table 68
Parameter	Value Range	Description/Function
	(Default)
Call Waiting	(1)	This sequence is carried out by the VPS when performing
Sequence		call waiting if the extension being called is busy.
Release		This sequence is performed by the VPS to release call
Sequence for	(F)	waiting.
Call Waiting

Inband Signaling Parameters

These parameters are used if the PBX sends DTMF tones to the VPS to indicate the state of a call (busy, answered, disconnected, etc.). The integration Mode must be set to "Inband." If PBX type is set to a KX-T series telephone system, the Inband Signaling parameters will automatically default to the proper codes.

To select Inband Signaling Parameters, follow the menu path as shown:

System Administration Top Menu - 1 - 6 - 3 - 2

The following parameters can be programmed using "0-9", "", "#", and "A-D."

		Table 69
Parameter	Value Range	Description/Function
	(Default)
Ringback	(1)	Indicates "Ringback Tone." Sent to the VPS when the
		extension dialed is ringing.
Busy	(2)	Indicates "Busy Tone." Sent to the VPS when the
		extension dialed is busy.
Reorder		Indicates "Reorder Tone." Sent to the VPS when an
	(3)	invalid extension number is dialed or when inadvertently
		connected to another VPS.
DND	(4)	Indicates "Do Not Disturb Tone." Sent to the VPS if the
		dialed extension has the Do Not Disturb feature enabled.
Answer	(5)	Sent to the VPS when the called extension answers the
		call.
Forward to VM		Sent to the VPS if the called extension is forwarded to a
Ringing	(6)	voice mail port and that voice mail port is available to
		accept the call.

252 SYSTEM ADMINISTRATOR'S GUIDE