Panasonic KX-TVS50, KX-TVS80 installation manual 170, System Administration

A1 SYSTEM FEATURES

Table 32

FEATURE	DESCRIPTION		REFERENCE
Calling a Beeper	allows a subscriber to be notified by a beeper	•	See "Dial Number" and "Type of
	when he has a message(s). If the beeper has a		Device" in Table 36 in B2
	display, it is possible to send to it a callback		SYSTEM ADMINISTRATION
	number. The callback number can be		- MAILBOXES.
	recorded when a caller leaves a message. If	•	See "Authorization for Message
	the caller does not leave a callback number,		Notification" and "Beeper
	the System Callback No., or the caller's		Callback No. Entry Mode" in
	number if it is received through a telephone		Table 37 and 38 in B3 SYSTEM
	company's Caller ID service, will be sent		ADMINISTRATION -
	instead.		SETTING COS (CLASS OF
	To utilize this feature, follow the procedure		SERVICE) PARAMETERS.
		•	See C3 SETTING COS
	below.
			(CLASS OF SERVICE)
	1)		PARAMETERS.
	Go to the System Administration Top Menu,
	and type 1-2 (Program - Class of Service) and
	COS No.(1-63). Select "Yes" in the
	Authorization for Message Notification
	parameter. Make 1 selection as you like in the
	Beeper Callback No. Entry Mode parameter.

2)

From the System Administration Top Menu, type 1-1-1-Mailbox No.-Y-2-Device No. (1-

3)(Program - Mailbox Setting - Enter/Edit - Mailbox No. Entry - Do you want to edit this mailbox? - Notification Setting - Device No. Entry). For Dial Number parameter: Before the beeper number, enter your PBX's line access code (for dialing outward). After the beeper number enter an X. (This X represents the callback number that the caller will enter, and later will appear on your beeper.) Finally, select "Beeper" in the Type of Device parameter.

170 SYSTEM FEATURES