Panasonic KX-TVS80, KX-TVS50 installation manual Digit Translation Table Parameters

		3.2 PBX PARAMETERS AND PORT SETTINGS
		Table 11
Code	Call State	Sent to the Voice Mail Port When...
(default)
	Forwarded to Voice	The extension dialed is forwarded to Voice Mail and no
7	Mail (Busy)	other Voice Mail ports are available to accept the call. (This
		signals the Voice Mail port [usually Auto-Attendant] to let
		the caller to leave a message.)
8	Forwarded to Extn.	The extension dialed is forwarded to another, non-Voice
		Mail extension.
9	Confirmation Tone	The Message Waiting Lamp On or Message Waiting Lamp
		Off code is dialed successfully.
#9	Disconnect	The caller disconnects. The central office must set a CPC
		signal to the PBX line for this signal to work for CO calls.

Digit Translation Table Parameters

These parameters allow PBXs that have a fixed Follow-on ID sequence to be used with the KX-

TVS50/80. For example, a Follow-on ID sequence of [ 101] can be changed to [#6101] by using these parameters.

•Inter-DigitTime-Out:This parameter defines the interval of incoming signals (Follow- on ID) from the PBX to the VPS. The Digit Translation Table applies the digits received within this time to translation.

•Input-Output (up to 8 alphanumeric characters): When the system receives digits within the inter-digit time, it checks them against the input table. If they are found, the system utilizes the output digits in their place.

The Remainder of this section consists of step-by-step guides for software verification and programming of the recommended Panasonic PBX systems.

If you have any problems as you go through this section, please call Panasonic Technical Support at (201) 392-4843

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS 49