Panasonic KX-TVS80 D3 Setting UP Message Waiting Notification, Setting Device Status, 279

D3 SETTING UP MESSAGE WAITING NOTIFICATION

D3 SETTING UP MESSAGE WAITING NOTIFICATION

The VPS is able to notify the Message Manager that unplayed messages are waiting in the Message Manager's Mailbox. Two types of Message Waiting Notification are available — Notification by Message Waiting Lamp and Notification by Calling.

Setting Message Waiting Lamp Status

The VPS illuminates the message waiting lamp on the extension when a new message is recorded in the Message Manager's Mailbox.

1.Log in the Main Menu.

2.Press [2] to set Message Waiting Notification

3.Press [1] to change the Message Waiting Lamp Notification Status.

4.Press [1] to change the Message Waiting Lamp Notification Status, or [2] to accept it.

Setting Notification by Calling Status

The VPS calls the preset telephone or beeper when a new message is recorded in the mailbox. Set the following parameters as appropriate.

Setting Device Status

For each device, the notification is enabled or disabled according to a preset schedule. The Message Manager cannot enable a device according to a schedule. The System Administrator must accomplish this task (see "Time Frame 1, 2" in Table 36 in B2 SYSTEM ADMINISTRATION - MAILBOXES).

1.Log in the Main Menu.

2.Press [2] to set Message Waiting Notification

3.Press [2] to change the notification method.

4.Press [1], [2], or [3] to select the device status.

•[1] Schedule (enabled on the schedule)

•[2] Continuously (enabled whole day)

MESSAGE MANAGER'S GUIDE 279