Panasonic KX-TVS80, KX-TVS50 Press the Next button SP-PHONE.Screen output M # #, Press Store

4.3CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308

ports.

•KX-TVS50/80 (2 ports): assign 1 jack

From the SYS-PGM NO ? screen:

a)Enter [117].

b)Press the NEXT button (SP-PHONE).Screen output: M: # #

c)Enter the jack number of the port you will use for the Voice Mail (2 - 8).

d)Press STORE.

e)Press END (HOLD) when finished.

Conditions:	Jack 01 cannot be used as a Voice Mail port. A jack
	programmed as a Manager Extension (System Program
	[006]) cannot be used in this program.

4.Skip this step unless setting flexible numbering.

System Program [118] (Voice Mail Extension Number Assignment) is automatically set. This program allows you to assign an extension number to each Voice Mail port. Since the jack connected to the VPS provides 2 extensions, this enables you to assign extension numbers to each port. You can assign any extension number that is not already assigned to another port. To reach the VPS, users dial these extension numbers. It is not necessary to change the default programming for the extensions 295 and 296.

From the SYS-PGM NO ? screen:

a)Enter [118].

b)Press the NEXT button (SP-PHONE). Screen output: VM NO?

c)Press the NEXT button (SP-PHONE). Screen output: VM-1: #_ _ -1: 295

( _ _ = the port number you entered in program 117)

d)Enter the extension number that you want this port to have. (The default extension number for port 1: 295; port 2: 296)

e)Press STORE.

f)Repeat c, d, and e until all extension numbers are entered.

Conditions:	No 2 jacks on the system can have the same extension
	number. If you try to enter a number that is already
	assigned, you will hear an error tone. Each digital
	extension connected provides 2 Voice Mail ports and
	must have 2 different extension numbers assigned.

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 81