Panasonic KX-TVS50 Print All of the VPS Parameters Gprn, 142, Type GPRN, then Press Return

7.2UTILITY COMMANDS

$ LOAD

VPS Flash Memory Data Load (PC -> VPS : Xmodem)

1:Program

2:Parameters

3:System Prompts

4. User Prompts-1

5. User Prompts-2

6. Custom Service Menu

7. Personal Greetings

8. Company Greetings Select No.:=

2.Select the item to be restored to the flash memory, then Press RETURN.

To start press ‘RETURN’

3.Press RETURN.

Start - - - - - - Load!!

When "CCC" appears, the VPS is ready for loading.

4.Set the data terminal to the sending (Call) mode (Xmodem). Then enter the backup filename. Press ENTER. The backup data will be restored to the flash memory.

5.When the parameter load has been completed, power-off and restart the system.

Note

The data terminal used must be equipped with communications software that supports the Xmodem file transfer protocol. The command can be canceled by Typing [\] before entering the sending mode. Once the sending mode has been selected, use the cancel command of the communication software being used.

7.2.9Print All of the VPS Parameters (GPRN)

This command is used to print all VPS parameter settings (output to screen).

Type GPRN, then Press RETURN.

142 SYSTEM MAINTENANCE AND TROUBLESHOOTING