DIAGRAM OF THE CONSOLE
Water Bottle
Holder
(Water bottle is not included)
STEP BY STEP CONSOLE OPERATION
Monitor Display
Speed Control
;1Insert the key fully into the power switch.
Before the console can be operated, two "AA" batteries must be installed (see assembly step 6 on page 6). Follow the steps below to operate the console.
Step onto the grip tape on the treadmill. Find the clip attached to the key (see the drawing above), and slide the clip onto the waistband of your clothing.
Follow the steps at the right and on page 9 to operate the console.
Note: Inserting the key will not turn on the dis-
play. The display will turn on when the ON/RESET button is pressed or when the walking belt is started. (If you just installed batteries, the display will
©
already be on.)
