Panasonic KX-TVS80, KX-TVS50 Error Log Display Elog, 137, Type PSET, then Press Return

7.2 UTILITY COMMANDS

printer or data terminal must be connected to the VPS at the RS-232C port for the reports to be printed or displayed.

1.Type PSET, then Press RETURN.

$ PSET

Report Print Out Service [ Disable ]

1 : Enable 2: Disable :=

2.Type [1] to enable this function or Type [2] to disable it.

Enter The Print Out Time (HH:MM, AM/PM) :=

3.Type the time to print the reports.

Note

The reports will be displayed only if the system is in the mode where the ">" prompt is displayed.

7.2.6Error Log Display (ELOG)

This command is used when diagnosing VPS problems. When selected, this command will display an error log.

COM. Communication error between CPU and DSP

DATA Process error of voice data

MEM. Memory error

PRG. Program error in CPU card

R/W Read/Write error of Flash Memory

Type ELOG, then Press RETURN.

$ ELOG
DEVICE		ERROR	TIME
1.	CPU	MEM-GET	JUL-14 14:00 PM
2.	CLOCK		JUL-14 14:00 PM
3.	FLASH	DATA R/W (xx:yyyy)	JUL-14 14:00 PM
	MEMORY
4.	DSP*	SCAN	JUL-14	14:00 PM
5.	DSP*	FIFO	JUL-14	14:00 PM
6.	CPU	APPLICATION (x)	JUL-14	14:00 PM

* = Port number (1-2)

Note

The errors that can be identified by the system are displayed and explained in the following tables.

SYSTEM MAINTENANCE AND TROUBLESHOOTING 137