4.2CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TA624

a)If the KX-TVS50/80 is answering all incoming calls:

CO Mode—Use System Programs [414](Day Mode), [415](Night Mode), [416](Lunch Mode) to set this parameter. Program all lines DIL to the first extension of the Voice Mail hunt group. The KX-TA624 will allow incoming CO calls to hunt only if the CO lines are DIL to the first port of the hunt group. Lines programmed as Normal do not hunt.

b)If the KX-TVS50/80 is only answering calls not answered by the operator (Operator Backup):

Flexible Ringing Assignment—For each CO line, use System Programs [408](Day mode), [409](Night Mode) and [410](Lunch Mode) to enable ringing at the operator's extension(jack).

Delayed Ringing Assignment — To give the operator time to answer the call before the VPS picks up, we recommend setting the delay to 3 or 4 rings for each extension connected to the KX-TVS50/80. Use System Programs [411](Day Mode), [412](Night Mode) and [413](Lunch Mode).

CO Mode — Set the mode for each CO to Normal. Use System Programs [414 ](Day Mode), [415](Night Mode) and [416](Lunch Mode) to set this parameter.

Table 14 2 CO Lines, 2 Ports

CO Lines

Ports

 

 

1

1, 2

 

 

2

1, 2

 

 

c)If the KX-TVS50/80 is only answering calls not answered by user extensions:

Flexible Ringing Assignment — For each CO line, use System Programs [408](Day Mode), [409](Night Mode) and [410](Lunch Mode) to enable ringing on every extension (jack) that you want to have ring.

Delayed Ringing Assignment — To give users time to answer the call before the VPS picks up, we recommend setting the delay to 3 or 4 rings for each extension connected to the KX-TVS50/80. Use System Programs [411](Day Mode), [412](Night Mode) and [413](Lunch Mode).

CO Mode — Set the mode for each CO to Normal. Use System Programs [414](Day Mode), [415](Night Mode) and [416](Lunch Mode) to set this parameter.

6.Unplug or power down the KX-TA624.

7.Connect the jack(s) assigned in Step 3 to the KX-TVS50/80.

8.Connect your laptop computer to the KX-TVS50/80 and start your communication software (i.e., HyperTerminal, Procomm Plus, Smartcom...).

9.Disconnect the power from the VPS and set the DIP switch to position 5.

Only perform this step when initially setting up the system.

68

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX

Page 68
Image 68
Panasonic KX-TVS50, KX-TVS80 CO Lines, 2 Ports, Only perform this step when initially setting up the system