2.5 INSTALLATION STEPS
INSTALLATION 31
4. Perform Quick Setup. (See Section 5 CUSTOMIZING THE SYSTEM)
5. Check Quick Setup:
The Power Indicator on the Voice Processor should be solid.
The screen output should be: [On Line].
If you do not see the "On Line" message, check the following:
The line cord to the Voice Processor has 4 conductors.
The programming on the KX-TA624 is correctly set in system Program [130], or
[130] and [131].
The programming on the KX-TD816/1232/308 is correctly set in System Program
[117].
6. Set up Class of Service (COS) for each user. Customize voice prompts if necessary. (See
Appendix B SYSTEM ADMINISTRATOR'S GUIDE)
7. Perform Administrative Program through a computer. (See Appendix B SYSTEM
ADMINISTRATOR'S GUIDE)
Do not turn the power off while the VPS is activated so as not to cause malfunction.
To turn the power off after installing the VPS, unplug the power cord from the VPS a
few minutes after disconnecting station wire(s).
CAUTION