Panasonic KX-TVS80, KX-TVS50 Loading New or Saved Data to the VPS Load, 141, Press Return

7.2 UTILITY COMMANDS

To start press ‘RETURN’

3.Press RETURN.

-- - - - - SAVE Start!!

4.Perform a Standard File Transfer. Set the data terminal to the receiving (Answer) mode (Xmodem) and specify the backup filename. The specified data will be transmitted to the data terminal.

Note

The data terminal used must be equipped with communications software that supports the Xmodem file transfer protocol. The command can be canceled by Typing [\] before entering the receiving mode. Once the receiving mode has been selected, use the cancel command of the communication software being used.

7.2.8Loading New or Saved Data to the VPS (LOAD)

This command is used to install new data or to restore saved data to the VPS. The LOAD command must be executed for each data file.

When performing this operation, always wait until the process completion indication appears before proceeding.

1.Type LOAD, then Press RETURN. KX-TVS50

$ LOAD

VPS Flash Memory Data Load (PC -> VPS : Xmodem)

1:Program

2:Parameters

3:System Prompts

4. User Prompts-1

5. User Prompts-2

6. Custom Service Menu

7. Personal Greetings Select No.:=

KX-TVS80

SYSTEM MAINTENANCE AND TROUBLESHOOTING 141