Switched Rack PDU

USER’S GUIDE

®

Option

Description

 

 

SSH Host Key Fingerprint

 

 

SSH v1:

Displays the SSH version 1 fingerprint for the host key. The fingerprint is

 

a unique identifier to further authenticate the host key. In the control

 

console, choose Advanced SSH Configuration and then Host Key

 

Information to display the fingerprint.

 

 

SSH v2:

Displays the SSH version 2 fingerprint for the host key. The fingerprint is

 

a unique identifier to further authenticate the host key. In the control

 

console, choose Advanced SSH Configuration and then Host Key

 

Information to display the fingerprint.

 

 

SNMP

An Access option (the Settings option in the control console) enables (by default) or disables SNMP. When SNMP is enabled, the Access Control settings allow you to control how each of the four available SNMP channels is used.

To define up to four NMSs to serve as trap receivers, see Trap Receiver settings.

 

To use SNMP to manage a Switched Rack PDU, see the

 

PowerNet® SNMP Management Information Base (MIB)

See also

Reference Guide (.\doc\en\mibguide.pdf) on the APC Rack

PDU Utility CD that came with your Rack PDU.

Setting

Definition

Community Defines the password (maximum of 15 characters) that an NMS defined

Name

by the NMS IP/Domain Name setting uses to access the channel.

84

Page 87
Image 87
APC AP7900 manual Console, choose Advanced SSH Configuration and then Host Key, Setting Definition