Switched Rack PDU

USER’S GUIDE

®

How to enable outlet groups

From the Outlets menu in the Web interface, select Outlet Groups, configure the following parameters, and click Apply.

Enable creation of outlet groups.

Parameter

Description

 

 

Device Level Outlet Group

To create an outlet group, you must enable this

 

parameter. It is disabled by default.

 

 

Enable support for global outlet groups (linked groups).

Parameter

Description

 

 

Multicast Name

To link outlet groups on multiple Switched Rack PDUs, you must

 

define the same Multicast name and Multicast IP address on each

Multicast IP

of those Rack PDUs.

 

 

NOTE: A Maximum of four devices can be configured with the

 

same Multicast name and Multicast IP address.

 

 

How to create a local outlet group (Web interface)

1.From the Outlets menu in the Web interface, select Outlet Groups.

2.Make sure outlet groups are enabled.

See Enable creation of outlet groups.

3.Click Create Local Outlet Group.

4.Under Configure Local Outlet Group, select each outlet that will be in the group. You must select at least two outlets.

37

Page 40
Image 40
APC AP7900 manual How to enable outlet groups, How to create a local outlet group Web interface, Parameter Description