
Switched Rack PDU
USER’S GUIDE
®
APC Device IP Configuration Wizard
Purpose and Requirements
Purpose: configure basic TCP/IP settings
You can use the APC Device IP Configuration Wizard to configure the basic TCP/IP settings (IP address, subnet mask, and default gateway) of the following:
•Network Management Cards
•Devices that contain embedded Network Management Cards
Using the Wizard, you can configure the basic TCP/IP settings of installed or embedded Network Management Cards in either of the following ways:
•Automatically discover and configure unconfigured Network Management Cards remotely over your TCP/IP network.
•Configure or reconfigure a Network Management Card through a direct connection from the serial port of your computer to the device that contains the card.
The Wizard can discover and configure Network Management Cards only if they are on the same network segment as the computer that is running the Wizard.
System requirements
The Wizard runs on Windows NT®, Windows 2000, Windows 2003, and Windows XP
148