®
USER’S GUIDE
Switched Rack PDU
81
Telnet/SSH Port Configuration
Telnet Port Identifies the TCP/IP port used for communications by Telnet with the
Rack PDU. The default is 23.
You can change the Port setting to the number of any unused port
between 5000 and 32768 to enhance the protection provided by User
Name and Password settings. Then, according to the requirements of
your Telnet client program, you must use either a colon (:) or a space in
the command line to specify the non-default port number. For example,
for a port number of 5000 and a Rack PDU IP address of
159.215.12.114, your Telnet client would require one or the other of the
following commands:
telnet 159.215.12.114:5000
telnet 159.215.12.114 5000
SSH Port Identifies the TCP/IP port used for communications by the Secure SHell
(SSH) protocol with the Rack PDU. The default is 22.
You can change the Port setting to the number of any unused port
between 5000 and 32768 to enhance the protection provided by User
Name and Password settings. See the documentation for your SSH
client for information on the command line format required to specify a
non-default port number when starting SSH.
Option Description