Switched Rack PDU

USER’S GUIDE

URL address formats

Type the Rack PDU’s DNS name or IP address in the Web browser’s URL address field and press ENTER. Except when you specify a non-default web server port in Internet Explorer, http:// or https:// is automatically added by the browser.

If the error “You are not authorized to view this page” occurs (Internet Explorer only), someone is logged onto the Web interface or control console. If the error “No Response” (Netscape) or “This page cannot be displayed” (Internet Explorer) occurs, Web access may be disabled, or the Rack PDU may use a non-default Web- server port that you did not specify correctly in the address. (For Internet Explorer, you must type http:// or https://as part of the address when any port other than 80 is used.)

For more information, see Port assignments.

For a DNS name of Web1, the entry would be one of the following:

http://Web1if HTTP is your access mode

https://Web1if HTTPS (SSL/TLS) is your access mode

For a System IP address of 139.225.6.133, when the Rack PDU uses the default port (80) at the Web server, the entry would be one of the following:

http://139.225.6.133if HTTP is your access mode

https//139.225.6.133if HTTPS (SSL/TLS) is your access mode

For a System IP address of 139.225.6.133, when the Rack PDU uses a non-default port (5000, in this example) at the Web server, the entry would be one of the following:

http://139.225.6.133:5000if HTTP is your access mode

 

https://139.225.6.133:5000if HTTPS (SSL/TLS) is your

®

access mode

26

Page 29
Image 29
APC AP7900 manual URL address formats