APC AP7900 manual Example Radius users file

Switched Rack PDU

USER’S GUIDE

®

Configuring the RADIUS server. You must configure your RADIUS server to work with the Rack PDU. The following example shows how to configure a RADIUS server for use with a Rack PDU. APC supports authentication and authorization of users by various RADIUS servers and does not recommend a specific RADIUS server.

1.Add the IP address of the Rack PDU to the RADIUS server client list (file).

2.The users must be configured with a Service-Type attribute. If no Service-Type attribute is configured, the user will have read-only access (on the Web interface only). There are two acceptable values for Service-Type: Administrative-User (6), which gives the user Administrator permissions, or Login-User (1), which gives the user Device Manager permissions.

The following examples may differ somewhat from the required content or format of your specific RADIUS server.

See your RADIUS server documentation for information about the RADIUS users file.

See also

Example: (RADIUS users file)

#

UPSAdmin Auth-Type = Local, Password = "admin"

Service-Type = Administrative-User

UPSDevice Auth-Type = Local, Password = "device"

Service-Type = Login-User

UPSReadOnly Auth-Type = Local, Password = "readonly"

103