Switched Rack PDU

USER’S GUIDE

®

Outlet Settings for Outlets and Outlet Groups

How to initiate a control action

If you apply an outlet control action to outlets or outlet groups, the following delays are used for the action:

• For an individual outlet (not in an outlet group), the action uses the delay periods and reboot duration configured for that outlet.

For a global outlet group, the action uses the delay periods and reboot duration configured for the global outlet.

For a local outlet group, the action uses the delay periods configured for the lowest-numbered outlet in the group.

Web interface. To control the outlets on your Switched Rack PDU

1.Select Outlets, and then Control on the navigation menu.

2.Mark the check-boxes for each individual outlet or outlet group to control, or select the All Outlets check-box.

3.Select a Control Action from the list, and click Next >>. On the confirmation page that explains the action, choose to execute or cancel it.

Control Console. Select Outlet Control/Configuration from the Device Manager menu to display a list of outlets. For each outlet, the list indicates whether it is a member of an outlet group.

1.Choose either or the following:

To control one outlet and the outlet group, if any, to which it belongs, select the number of the outlet, and then select Control Outlet.

To control all outlets, select Master Control/Configuration, and then Control of ALL Outlets.

2.Select a control action.

3.On the confirmation screen that describes the action to be executed, type Yes at the prompt to perform the action.

42

Page 45
Image 45
APC AP7900 manual Outlet Settings for Outlets and Outlet Groups, How to initiate a control action