APC AP7900 manual How to configure outlet settings and outlet name, Setting Description

Switched Rack PDU

USER’S GUIDE

®

How to configure outlet settings and outlet name

Settings that you can configure. The following settings are available in both the Web interface and control console unless otherwise indicated:

Setting	Description
Power On Delay	Set the number of seconds that the Rack PDU waits after a
	command is issued before applying power to an outlet.
	NOTE: To configure an outlet to remain off at all times, check the
	Never check box next to Power On Delay in the Web interface, or
	configure a value of –1for Power On Delay in the control console.
Power Off Delay	Set the number of seconds that the Rack PDU waits after a
	command is issued before removing power from an outlet.
	NOTE: To configure an outlet to remain on at all times, check the
	Never check box next to Power Off Delay in the Web interface, or
	configure a value of –1for Power Off Delay in the control console.
Reboot Duration	Set the number of seconds an outlet remains off before restarting.
Name (Web	Set the name for one or more outlets. The name is displayed next
interface)	to the outlet number on status screens.
Outlet Name
(control console)
Link (Web	Define an HTTP or HTTPS link to a Web site or IP address.
interface)	• http://www.apcc.com links the outlet to the home page of the
	APC Web site.
	• http://158.205.7.201 links the outlet to the Web interface of the
	Switched Rack PDU at the IP address 158.205.7.201, enabling
	you to log on to that interface (if you have the appropriate access).
	NOTE: If the outlet is a member of an outlet group, the only link that
	is used is the link configured for the global outlet or (for a local
	outlet group) the link configured for the lowest-numbered outlet of a
	local outlet group. You can configure a link for another outlet in an
	outlet group, but that link will be available to use only when that
	outlet is no longer a member of an outlet group.

44