Switched Rack PDU

USER’S GUIDE

®

Setting

Description

 

 

Low Load Warning

Set the low threshold, in amps, for the current drawn from this

Threshold

phase or bank during normal operation. A load at or below this

 

level generates a warning.

 

 

Overload Outlet

Prevent users from applying power to outlets during an overload

Restriction

condition. You can set the following restrictions for each outlet:

 

None: You can apply power to outlets regardless of an Overload

 

Alarm or Near Overload Warning.

 

On Warning: You cannot apply power to an outlet on the

 

selected phase or bank if the current for that phase or bank has

 

exceeded the Near Overload Warning threshold.

 

On Overload: You cannot apply power to an outlet on the

 

selected phase or bank if the current for that phase or bank has

 

exceeded the Overload Alarm threshold.

 

 

How to configure Device Settings

Web interface. Select Configuration on the Switched Rack PDU menu. Then, under Device Settings, click the Configure button and configure the Name and Location fields for the Rack PDU, and set the Coldstart Delay.

Control console.

1.Select Outlet Control/Configuration from the Device Manager menu.

2.Select Master Control/Configuration from the displayed list.

3.Select Master Outlet Configuration from the next menu displayed.

4.Change the Name, Location, or Coldstart Delay from this menu.

47

Page 50
Image 50
APC AP7900 manual How to configure Device Settings