Panasonic KX-TVS50, KX-TVS80 Set Time Time, Print Reports at Specified Time Pset, 136

7.2UTILITY COMMANDS

Verification: =

c)Type the password again for verification.

4.To clear a password:

a)Type [1] or [2].

Maximum 8 characters

NEW PASSWORD : =

b)Press ENTER. Do not type a password on this screen.

VERIFICATION : =

c)Press ENTER. Do not type a password on this screen.

Note

The password entered on the screen will not appear. The VPS does not distinguish the capital letter from the small letter.

7.2.4Set Time (TIME)

The TIME command is used to set the system date and time. A number of system functions require that the system time and date be set correctly. These functions include message waiting notification, external message delivery, call-retries-after initial-failure-to-connect, and automatic deletion of messages.

1.Type TIME, then Press RETURN.

$ TIME

Current time is 12:34, PM

Enter new time (HH:MM, AM/PM) : =

2.Type the current time.

Current date is TUE AUG-3-1999

Enter new date (MM-DD-YY) : =

3.Type the current date. For the year, type the last 2 digits.

Note

Enter the exact time and date. This command cannot be used when either the System or the Message Manager is accessing the time setting feature.

7.2.5Print Reports at Specified Time (PSET)

This command is used to issue system usage reports (Flash Memory Usage Report/Port Usage Report/Call Account Report) at a specified time each day by entering the PSET command. A

136 SYSTEM MAINTENANCE AND TROUBLESHOOTING