Panasonic KX-TVS80, KX-TVS50 installation manual Release Sequence For Call Waiting

Models: KX-TVS80 KX-TVS50

1 348
Download 348 pages 1.6 Kb
Page 51
Image 51

3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs

Table 12

PBX Type

Other

T308/

T1232

T96

T336

TD816/

TD308

TA series

 

Manufacturers

T616

 

 

 

1232

 

 

 

 

 

 

 

 

 

 

 

Release Sequence

*

N/A

F

N/A

N/A

F

F

F

for Call Waiting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Check with manufacturer.

N/A

Not Available

(A)Adding "A" for "answer" to the operator and extension transfer eliminates the message: "You have a call" when the AA transfers a call. The VPS disconnects after line is answered. Adding "D" for "disconnect" creates a blind transfer.

3.3.2KX-T123211D Software Verification and Programming for Inband Integration

1.Check the software version of the KX-T123211D by using System Program [98], which shows the software version number:Y201Z940430(TM3)

The underlined digits represent the software production date code (format YYMMDD). In this example, the date code is April 30, 1994 (year, month, day). For this software version, the software production date of the PBX must be April 30, 1994, or later.

If the software production date of the PBX is earlier than 4/30/94, call National Parts Center (1-800-833-9626) to order a software upgrade.

2.Enable System Program [80] for each extension connected to the VPS.

This parameter is used to tell the KX-T123211D which extensions are connected to the VPS. Ports with this parameter enabled can receive Follow-on ID and DTMF call status signaling (busy, answered, disconnect, etc.) if the Voice Mail integration and DTMF integration features are also enabled.

3.Enable System Program [81] to turn on DTMF Integration. On extensions with the Voice Mail port parameter enabled, the KX-T123211D can send codes (DTMF tones) to indicate

call states; this increases VPS efficiency. Codes apply to all transferred calls; CO line calls only indicate disconnect (provided the KX-T123211D is programmed for CPC detection and the CO sends the CPC signal). Refer to the Table 11 in the Section 3.2.4 PBX Interface Parameters.

4.Put all extensions connected to the VPS into 1 extension group using System Program [60].

Reserve this extension group for these extensions! Do not mix other extensions into this group.

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS

51

Page 51
Image 51
Panasonic KX-TVS80, KX-TVS50 installation manual Release Sequence For Call Waiting