5.1 STARTING UP
CUSTOMIZING THE SYSTEM 95
Depending on your PBX type, some steps will be skipped as shown below.
5.1.3 Starting the Quick Setup
The sequence must be followed through to the end to take effect. If you press "\", you will ha ve
to start over. Quick setup may be performed again without erasing prior data (for example,
when adding a slave system).
At the System Administration Top Menu, Type [5] and Press ENTER, or Type [3 ] then QSET
and Press ENTER (see 7.2.17 Quick Setup (QSET)).
Screen output:
Tabl e 1 8
PBX Type Required Procedures
KX-T308/T616 12345678
KX-T123211D
T336/T96*1
*1 Not available in US
1345678
Non-Panasonic System 1 3 4 5 6 7 8
KX-TD816/1232/308/TA series 1 4 5 6 8
Quick Setup Utility for connection to Panasonic KX-T series telephone systems
This utility provides a quick way of programming the Voice Processing System to operate
in a standard automated attendant or voice mail configuration when connected to a
Panasonic KX-T series telephone system. The system will prompt you to enter, modify or
confirm settings based upon which PBX type you select.
By entering the appropriate information in the following screens, the system sets PBX
integration parameters, identifies the extension numbers connected to it, creates default
mailboxes, sets its ports to handle callers with automated attendant or voice mail service,
sets system passwords and sets the time and date. Finally, it confirms that you want to
activate the system based on the information you entered, modified, or confirmed.
To proceed, press ENTER. To exit and cancel Quick Setup now, press [\].

System Administration Top Menu 5

3 QSET