Panasonic KX-TVS80, KX-TVS50 installation manual Port Test System Setup

4.2CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TA624

CAUTION

Setting the DIP switch to position 5 will default the Voice Processing System, resulting in a loss of all user programming, and voice messages (except User1 and User2 prompts).

10.Plug in and power up the KX-TVS50/80 and wait approximately 2.5 min while the system initializes.

"System Administration" Start-Up Sequence

Before starting the VPS, make sure all installation and line connections have been done as described in Section 2.

Plug in and turn the power switch to ON on the KX-TA624. The calls to the VPS can be processed after the Power Indicator stops flashing.

After turning the power on, the system starts up in the following sequence:

•The Power Indicator light goes on.

•The Power Indicator light begins to flash.

•"Checking Flash Memory Cards." is displayed on the screen.

Screen output:

Checking Flash Memory Cards.

Please wait...

PORT TEST...

SYSTEM SETUP

1... 2... 3...

•The VPS tests the CPU card, the flash memory, and the ports until "1...2...3..." is displayed.

•Active ports are displayed on the screen.

Screen output:

Active COs: 1 2

APT Interface Connection is Established ** ON LINE MODE **

The display will alert you if System Setup is not completed successfully.

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX 69