Panasonic KX-TVS50, KX-TVS80 B6.6 System Caller Name Announcement, 232, 342 P.M, 1542

B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS

		Table 52
Parameter	Value Range	Description/Function
	(Default)
Position of	1. Before	This parameter setting is functional only when User 1 or
"AM/PM" in	2. After	User 2 Prompts are in use. This parameter specifies the
Time Stamp	3. 24-h	following:
	(After)
		1. Before - the VPS announces "AM/PM" before the time
		(e.g., P.M. 3:42).
		2. After - The VPS announces "AM/PM" after the time
		(e.g., 3:42 P.M.).
		3. 24-h - the VPS announces the time in 24-h format (e.g.,
		15:42).
		Note: When System Prompts are in use the parameter is set
		to "After".

B6.6 System Caller Name Announcement

Up to 120 Caller ID numbers can be assigned to announce pre-recorded Caller ID caller names when extension users listen to messages from the assigned numbers left in their mailbox. Extension users can also hear caller names when calls from the assigned numbers are transferred to them from the VPS (Caller ID Screening). The recorded caller names will also be heard when the callers use the Intercom Paging features. The recorded names will be added to the end of the page.

The Caller ID Screening feature is enabled or disabled in the COS (Class of Service) settings. This feature is also enabled by selecting "Call Screening" in 4.1 Call Transfer Status in the Subscriber's Guide.

The Intercom Paging feature is enabled by selecting "Intercom Paging" in 4.1 Call Transfer Status, and/or in 4.3 Incomplete Call Handling in the Subscriber's Guide.

System Caller Names are recorded by the Message Manager.

To access the proper menu for System Caller Name Announcement, follow the menu path as shown:

System Administration Top Menu - 1 - 5 - 6

232 SYSTEM ADMINISTRATOR'S GUIDE