Panasonic KX-TVS50, KX-TVS80 installation manual Software Verification

4.3CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308

4.3CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX- TD308

Note

Do not use system programs [106] or [602] for DPT Integration. The following 2 Sections

(4.3.1 KX-TD1232 Software Verification and Programming for Digital Integration via the Manager's Extension and 4.3.2 KX-TD1232 Software Verification and Programming for Digital Integration via the Operating and Maintenance Tool) are for the KX-TD1232 as examples. Please refer to them for the KX-TD816.

And the following Section (4.3.3 KX-TD308 Software Verification and Programming for Digital Integration via the Manager's Extension) is for the KX-TD308.

4.3.1KX-TD1232 Software Verification and Programming for Digital Integration via the Manager's Extension

It is important that the KX-TD1232 has the proper software level to allow Digital Integration with the VPS. Follow the procedures below to confirm the software level, then complete the required programming before starting up the VPS.

Note

Two methods of programming are available on the KX-TD1232. The instructions below show how to program without the operating and maintenance tool. For instructions on programming with the operating and maintenance tool, please see 4.3.2 KX-TD1232

Software Verification and Programming for Digital Integration via the Operating and Maintenance Tool.

All of the following procedures must be done after entering system programming. Refer to the KX-TD1232 Installation Manual for instructions on how to enter the system programming mode.

Software Verification

1.Verify Software - If you are configuring a 2-cabinet system, remember to check both cabinets. The software must be the same in each. Check the software version of the KX- TD1232 using System Program [116].

Example: P231UYMMDDA

The underlined digits represent the software production date code (year, month, day). For Digital Integration, the software version of the PBX must be P231U or higher.

(For KX-TD816, the version must be version P301O or higher for Digital Integration to be utilized.)

If the software version of the PBX is lower than this, call National Parts Center (1-800-

72 INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX