Panasonic KX-TVS80, KX-TVS50 installation manual 119, Mon Sun

		5.5 SETTING MAILBOXES
		Table 25
Description	Value Range	Description/Function
	(Default)
Dial Number	Up to 32 Digits of	Assigns the telephone or beeper number to Device 1,
	[1-9,0, ,#,P,T,M,X]	2 and/or 3.
	(None)	P: Pause
		T: Dial Tone Detection
		M: Dial Mode Switching Code (DTMF to Pulse, or
		Pulse to DTMF)
		X: Callback Number Entry Code
		1-9, 0, , #: Dial Codes
		The callback number entry code (X) must be entered
		if COS is set to enable and set to beeper.
		Use backspace to delete your entry.
Type of	1. Telephone	Assigns whether device is beeper or telephone.
Device	2. Beeper
	(Telephone)
Use Mode	1. Not Use	Not Use: Does not use device.
	2. Continuously	Continuously: The VPS notifies each time a message
		is recorded in the mailbox.
	3. Scheduled
		Scheduled: The VPS notifies the subscriber if a
	(Continuously)
		message is left during one of the time frames.
No. of Retries	0-9 Times	Specifies the number of times a device should be
	(0)	retried when busy or no-answer.
Busy Delay	0-120 min	The time the VPS will wait before retry on busy.
Time	(3)
No Answer	60-120 min	The time the VPS will wait before retry on No
Delay Time	(60)	Answer.
Time Frame 1,	1-12: h	Weekly Schedule for Message Waiting Notification.
2	00-59: min	The schedule is only used when Use Device is set to
MON - SUN	AM/PM: am/pm	Scheduled.
	: All Day
	Space: No Use

CUSTOMIZING THE SYSTEM 119