CyberData VoIP Paging/Loudspeaker Amplifier manual 4.2Device Configuration, admin

Models: VoIP Paging/Loudspeaker Amplifier

1 14

Page 13

7.Record the User/login name and password from the following dialog because you will need it later to configure the device.

1.Open your browser and type the IP Address of the Paging Amplifier.

2.When prompted, use the following default Web Access username and password:

Web Access Username:	admin
Web Access Password:	admin

3.Click the SIP Setup button.

4.Enter the following information:

SIP Server: <IP Address of UC Server>

SIP Password: <Authenticate Password>

5.Click Save Settings.

The figure below shows an example of how to complete the required fields.

Objectworld Communications Corp. • 308 Legget Drive • Ottawa, ON • Canada • K2K 1Y6 • T: 613‐599‐9698 • F: 613‐599‐7457 •www.objectworld.com

Image 13

The default Web Access username is 'admin' and the password is also 'admin'.

Open your browser and type in the IP Address of the Paging Amplifier.

You will need to enter the SIP Server's IP Address, User ID, Authenticate ID, Password, and select 'Yes' for SIP Registration.

Contents

VoIP Paging/Loudspeaker Amplifier Configuration GuideCyberData Corporation 2555 Garden Road Monterey, CACOPYRIGHT NOTICE CyberData VoIP Paging Amplifier Configuration GuideTN086 August2007‐2008 Objectworld Communications Corp Table of Contents 1 Introduction 1.1Network Topology 2 Known Integration Issues 3 Preparation 3.1PC Network Settingsadmin 3.3Upgrading the firmwareadmin admin4.1Gathering Information 4 SIP Configuration6.Click SIP Authentication 2.Login as the admin user3.Select the Identities tab in the left pane admin 4.2Device Configurationadmin SIP Authenticate ID SIP User IDoSee section 5TroubleshootingoSee section See section