D-Link DVG-1402S manual Tools Admin, Web Port Number WAN Access Control Administrator Password

Tools > Admin

At this page, the DVG-1402S administrator can change the system password. There are two accounts that can access the Broadband Router’s Web-Management interface. They are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes.

Web Port Number

WAN Access Control

Administrator

Password

The port number used to access the Broadband Router. The default port number for web management is 80.

WAN access control allows remote management via the DI-624to be configured from the Internet by a web browser. A username and password are still required to access the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host. Click the radio button to Enabled to activate this feature.

Enter the password, admin, here and the same password in the Confirm Password field. This will be the password that the administrator will use to gain access to the configuration menu of the device. There is no default password for this device.

45