AT&T 585-300-903 manual 12DCP Cabling and Administration, Call Types and Action Taken

9-12DCP Cabling and Administration

________________________________________________________________________________________________

________________________________________________________________________________________________

ENHANCED MODE - PROCEDURE: 014, WORD: 1

	BEARER CAPABILITY CLASS			OF SERVICE - CALL OPTIONS
1.	Bearer Capability COS: 6		DEFAULT CAPABILITIES
2.	Transport Mode:	0	Circuit	14.	Transport	Mode: 0	Circuit
3.	Information Type:	0	Restrict	15.	Information	Type: 0	Restricted
				16.	Bearer Capability: 4		Mode 0

CALL TYPES AND ACTION TAKEN

4.Voice: 0 Circuit switch the call

5.Voice Grade Data: 1 Insert a mode 2-to-analog modem pool facility

6.Mode 0: 0 Circuit switch the call

7.Mode 1: 0 Circuit switch the call

8.Mode 2: 0 Circuit switch the call

9.Mode 3: 0 Circuit switch the call

10.Unknown Digital: 0 Circuit switch the call

11.Unknown Analog: 1 Insert a mode 2-to-analog modem pool facility

12.Mode 3/2: 0 Circuit switch the call

13.X.25: 0 Circuit switch the call

Connected to CC0 ON-LINE ♥

MAJOR

MINOR

RUN TAPE

BUSY OUT

IN USE

WAIT

enter command: _

3 Data

5 Help 6 Field 7 Input 8 Cmds

Figure 9-6.Manager II Administration of DCP Port (Proc 014, Word 1)

3.The DCP extensions default to BCCOS 1. Change this to BCCOS 6 as shown in these examples. This allows the DCP port to communicate with either a digital or analog outside facility.

A call to/from this port will be circuit switched unless it is voice-grade data or unknown analog. In these cases, a modem pool will be inserted.