AT&T 585-300-903 manual Modem Pooling

DCP Mode 1 Installation and Administration 10-5

_______________________________________________________________________________________

_

2.Using Procedure 100, Word 2, assign BCCOS 7 to the trunk group (trunk group 76 is only an example).

NOTE

BCCOS 7 is the default and should not be modified. However, if BCCOS 7 has been modified at your site, use a custom BCCOS that has the default values of BCCOS 7 (one that uses robbed-bit signaling). Refer to the DEFINITY Generic 2 Administration Procedures manual (555-104-506) for default BCCOS values if needed.

ENHANCED MODE - PROCEDURE: 100, WORD: 2

TRUNK GROUPS - MODEM POOLING AND BCCOS

1.	Trunk Group:	76
2.	Bearer Capability Class of Service:	7

MODEM POOLING

3.Originate Mode: _

4.Answer Mode: _

5.Modem Type: _

6.First Choice: _

7.Test Type: _

Connected to CC0 ON-LINE ♥

MAJOR

MINOR

RUN TAPE

BUSY OUT

IN USE

WAIT

enter command: _

2 Repeat 3 Form

5 Help 6 Field 7 Input 8 Cmds

Figure 10-2.Manager II Mode 1 Administration (Proc 100, Word 2)