AT&T 585-300-903 manual 10-6DCP Mode 1 Installation and Administration, Timed Recall

10-6DCP Mode 1 Installation and Administration

________________________________________________________________________________________________

________________________________________________________________________________________________

3.Using Procedure 101, Word 1, make the assignments shown below:

ENHANCED MODE - PROCEDURE: 101, WORD: 1

TRUNK GROUP CHARACTERISTICS

1.Trunk Group: 76

2.Balance: 0 Disabled

3.	Battery Reversal: 0	Disabled
4.	Incoming Prefix Digit : -	No additional digit for DID
5.	DCS: 0	Disabled
6.	Touch-Tone In: 1	Enabled
7.	Touch-Tone Out: 1	Enabled
8.	CDR Active: 0	No

9.AIOD Billing Number: ----

TIMED RECALL

10.Time: 0

11.Level: 0 Recall occurs when recall time expires

12.CDR Variable Timer: -- Default (procedure 275 Word 3 field 12)

13.Pad Group: 0 Determined by trunk type in Procedure 100 Word 1

14.Tie Toll: 0 Not toll restircted

15.APLT Features Allowed: 0 Disabled (CCSA trunk)

16.Disconnect Supervision: 0 Disabled

Connected to CC0 ON-LINE ♥

MAJOR

MINOR

RUN TAPE

BUSY OUT

IN USE

WAIT

enter command: _

2 Repeat 3 Form

5 Help 6 Field 7 Input 8 Cmds

Figure 10-3.Manager II Mode 1 Administration (Proc 101, Word 1)