2Installing the monitor | Mitsubishi Electronics LDT422V instruction

P-2Installing the monitor (continued)

Installing in the portrait position

Conditions:

LDT422V can be installed in the portrait position, under the following conditions:

CAUTION:

Portrait position is available only when the monitor is wall- mounted or ceiling-mounted.

The stands (legs) can not be ﬁtted to the monitor in the portrait position.

Placing the monitor in the portrait position will shorten the average life of the LCD backlight.

Operation Environment (Temperature) shall be limited, as shown below:

Operation Environment:

Temperature	5 - 35°C / 41 - 95°F

Humidity	20 - 80% (without condensation)

Place the monitor in the position shown below.

Do not place the monitor in landscape in any other manner than shown.

Optional speakers (SP-422V) can not be attached when the LCD monitor is installed in the portrait position.

How to set-up

The “ ” logo should be on the LEFT side when viewed from the front of the monitor.

Landscape

Carry out as necessary

English

90°

LDT422V

logo

Clockwise

LDT422V

Downloaded From TV-Manual.com Manuals	English-15

Image 16

Mitsubishi Electronics LDT422V 2Installing the monitor, Installing in the portrait position, Conditions, How to set-up

Contents

LCD Display Monitor Index Features Important Information Declaration of Conformity Important Information Declaration Declaration of the Manufacturer Recommend Use Ergonomics Contents Buttons, Switch, and Indicator Parts Name and FunctionsExit Input Mute Parts Name and Functions Connectors and TerminalsAnti-theft lock slot Wireless Remote Control Description How to install the batteries How to Use the Wireless Remote ControlHow to remove the batteries Preparation for use 1Preparation for installation Determine the installation locationDo not Attempt to Install the LCD Monitor by Yourself To avoid the monitor from falling 2Installing the monitor Installing and removing the standsInstalling the main switch cover Using the wall mount or ceiling mount 2Installing the monitor Installing in the portrait positionHow to set-up Conditions Before connecting the signal cable to PC and Video 3Installing the speakersHow to install the optional speakers 4Connection procedure Wiring diagramPrevention of disconnection of Hdmi cable Before making connections 4Connection procedure Connecting with a computer analog connection Connecting with a computer digital connection Connection via the RGB2 in connector DVI-D Connecting a video device component video/HDMI device Component device English-21 5Connecting the power cord to the monitor Connecting the power source How to Use Flow of How to UsingVolume control Schedule setting Remote control Power Management Function Power Indicator1Turning on all the connected devices Turning on external devices 2Selecting the video input RGB1 RGB2 RGB3 RGB4 DVD/HD VIDEO-S Video 5Selecting the picture mode 4Auto-setup3Controlling the external devices 6Screen adjustment 7Picture adjustment 8Volume control 9Schedule setting 9Schedule setting How to set up schedule RS-232C Remote control 10Remote controlConnection Ascii HEX Power on Power OFFVolume UP Volume Down Main menu Conﬁguration of OSD screenSub menu screen Conﬁguration and basic operation of OSD screen Basic operation of OSD OSD screen functions Picture OSD screen functions Screen  Audio Reset Audio Balance  Treble PIP Picture in Picture CONFIGURATION1  OFF Timer CONFIGURATION1 Reset  Schedule CONFIGURATION2 CONFIGURATION3 Advanced Option Other functions PIP, POP function Other functionsReference Troubleshooting Speciﬁcations IPS Pin Assignment Asia Paciﬁc North AmericaEurope