Mitsubishi Electronics LDT422V manual Other functions, PIP, POP function, Reference

Other functions (continued)

PIP, POP function

The following table shows the combinations of signal inputs with which the “PIP” and “POP” modes function. However, these modes do not function when the screen size is “CUSTOM” or “REAL”.

					Sub screen
		RGB1	RGB2	RGB3	RGB4	DVD/HD	VIDEO<S>	VIDEO
	RGB1	×	×	×	×			
screen	RGB2	×	×	×	×	×		
	RGB3	×	×	×	×	×			: Supported
Main	RGB4	×	×	×	×	×			× : Not supported
	DVD/HD	×	×	×	×	×		
	VIDEO<S>						×	×
	VIDEO						×	×

By pressing the PIP ON/OFF button on the wireless remote control, you can change the PIP, POP, and SIDE BY SIDE modes in the order shown below.

Alternatively, you can change the modes using the PIP MODE setting of PIP in the OSD main menu. See page 37.

		SIDE BY SIDE	SIDE BY SIDE
PIP	POP	ASPECT	FULL	OFF

English

[Reference]

The resolutions in the PIP and POP modes are as follows:

PIP SIZE	< SMALL >	: 320 pixels X 240 pixels
	< MIDDLE >	: 480 pixels X 320 pixels
	< LARGE >	: 640 pixels X 480 pixels
POP SIZE		: 450 pixels X 338 pixels

NOTE:

Images displayed in the sub picture always fit the PIP sizes shown above irrespective of the aspect ratio of the input image.

Downloaded From TV-Manual.com Manuals English-43