Mitsubishi Electronics LDT422V manual Connecting a video device component video/HDMI device

P-4Connection procedure (continued)

Connecting a video device (component video/HDMI device)

This monitor can be connected to a video device equipped with component output such as a DVD player.

Refer to the user’s manual of the connected device for details. (Cables shown in the figure below are commercially available.)

•To connect a DVD player equipped with component output to the DVD/HD IN connector (YPbPr or YCbCr) on the monitor, use a BNC cable (BNC x 3 – BNC x 3) and a BNC-RCA adaptor (commercially available), or a signal cable (BNC x 3 – D connector). Select [DVD/HD] using the INPUT button on the monitor or the YPbPr button on the wireless remote control.

•To make audio connection, connect an RCA cable (audio) to the AUDIO IN2 connector or the AUDIO IN3 connector. Select [AUDIO2] or [AUDIO3] using the AUDIO INPUT buttons on the wireless remote control.

•To connect a DVD player equipped with HDMI output to the RGB1 IN connector (HDMI) on the monitor, use an HDMI signal cable.

Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control.

•For HDMI cable connection, select HDMI audio.

(You can select HDMI audio only when the video input is [RGB1].)

LCD monitor (rear)

DVD/HD IN (Y·Pb·Pr, Y·Cb·Cr)

Signal cable	To D connector output
(BNC x 3 to D connector)

		DVD player
BNC cable	To video output	(component device)
(BNC x 3 to BNC x 3)
	BNC-RCA adaptor	Audio output
	RCA cable (audio)

AUDIO IN2 (RCA)

GBR

VH

		VIDEO IN	S-VIDEO
HDMI
DVI IN	RS-232C IN
D-SUB OUT			IN1
D-SUB IN	RS-232C OUT	VIDEO OUT

IN2

IN3

OUT

L

R

DVD player

(HDMI device)

RGB1 IN (HDMI)

HDMI cable

To HDMI output

Downloaded From TV-Manual.com Manuals English-20