Mitsubishi Electronics LDT422V manual English-21

P-4Connection procedure (continued)

Connecting a video device (composite video/S video device)/stereo amplifier

This monitor can be connected to a stereo amplifier.

Refer to the user’s manual of the stereo amplifier for details. (Cables shown in the figure below are commercially available.)

•To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video cable. For connection to the audio input connector on the monitor, use an RCA cable (audio cable). Connect the connectors of the RCA cable (audio) correctly. For connection to the VIDEO IN connector, select [VIDEO] using the INPUT button on the monitor or the VIDEO button on the wireless remote control. For connection to the S-VIDEO IN connector, select [VIDEO<S>] using the INPUT button on the monitor or the VIDEO(S) button on the wireless remote control.

•When connecting a stereo amplifier to the monitor, be sure to turn off the power of the stereo amplifier. For connection to the audio output connector on the monitor, use an RCA cable (audio). Connect the connectors of the RCA cable (audio) correctly. Be sure to turn on the monitor first, and then turn on the stereo amplifier.

•The selected audio input signal is output from the AUDIO OUT connector.

English

LCD monitor (rear)

RCA cable (audio)
S video cable
S-VIDEO IN	AUDIO IN2	LCD monitor (first monitor)

G	B	R		VIDEO IN	S-VIDEO	IN2
		HDMI
		DVI IN	RS-232C IN			IN3
	V	H					R
		D-SUB OUT				L
					IN1	OUT
		D-SUB IN	RS-232C OUT	VIDEO OUT

VIDEO IN

AUDIO OUT

Audio output	S video output
To	To

BNC cable

VIDEO OUT

To video output

BNC cable

RCA cable (audio)	Audio input
	To

Video device

(composite video/S video device)

Stereo amplifier

	VIDEO IN
LCD monitor (second monitor)	External speaker	External speaker

Downloaded From TV-Manual.com Manuals English-21