OSD screen functions (continued)
ADVANCED OPTION
English
INPUT CHANGE
You can select the time for input switching from QUICK and
NORMAL.
NOTE : When you select QUICK, slight noise may appear.
TERMINAL SETTING
You can select the mode to display the RGB1 (HDMI) or RGB2
DVI-MODE:
Select this setting when displaying the RGB2
Select
HDMI SIGNAL:
Select this setting when displaying the RGB1 (HDMI) signal. Select LIMITED when displaying the signal that uses 16 to 235 levels of 256 levels for each of R, G, and B.
Select FULL when displaying the signal that uses all 256 levels (from level 0 to 255).
SCAN MODE
*For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO inputs only.
You can select the image display area.
OVERSCAN: About 95% of the input image is displayed.
UNDERSCAN: Almost 100% of the input image is displayed.
ADVANCED OPTION RESET
You can reset all the ADVANCED OPTION settings to the factory defaults.
FACTORY RESET
You can reset all the settings of PICTURE, SCREEN, AUDIO, CONFIGURATION1, CONFIGURATION2, CONFIGURATION3, and ADVANCED OPTION to the factory defaults.
Note that you cannot reset the settings of LANGUAGE and
DATE AND TIME.
SCAN CONVERSION
*For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO inputs only.
You can select the IP conversion mode. PROGRESSIVE: Interlace signals are converted into
progressive signals. Select this setting for normal cases.
INTERLACE: Interlace signals are displayed without being converted. Though this setting is suitable for motion images, still images aren’t displayed properly.
COLOR SYSTEM
* For the VIDEO<S> and VIDEO inputs only.
You can select the color system depending on the video device you use.
AUTO: | NTSC, PAL, SECAM, PAL60 or 4.43 NTSC is |
| automatically selected. |
NTSC: | NTSC |
PAL: | PAL |
SECAM: | SECAM |
4.43NTSC: | 4.43 NTSC |
PAL60 |
NOTE : When you use a video device purchased from overseas, set the COLOR SYSTEM menu.
Downloaded From | |
|
