U-1 Turning on all the connected devices
Turning on external devices
1. Turn on the connected devices such as the computer and VCR.
Before turning on the monitor, turn on the computer.
Turning on the monitor
2. Turn on the Main Power Switch.
The power indicator turns on green.
The control buttons on the bottom of the monitor and the wireless remote control don’t work while the Main Power Switch is off (the power indicator is off).
When using them, check that the Main Power Switch is on (the power indicator is on).
3.When the power indicator glows red, press the POWER button on the
monitor.
The power indicator turns green.
Power Indicator
|
| Status |
|
|
| LED |
Power ON | Green | |||||
Power OFF | Red | |||||
Power Standby when | Red On | |||||
“SCHEDULE” is enable | Green Blinking | |||||
Power Standby | Red, Green | |||||
Diagnosis (Detecting failure) | Red Blinking | |||||
|
|
| * See troubleshooting on page 44. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Main Power Switch
Power Management Function
This function reduces the power consumption of the monitor when the keyboard or the mouse is not used for a fixed period even though the power of the monitor is on.
While this function is working, the screen becomes dark and the power indicator glows green and red.
This function is available only when a computer equipped with the
Check that the power management function (power saver) for RGB is ON.
When you turn on this function for VIDEO, the monitor goes into the sleep mode in 10 minutes after RGB4, DVD/HD, VIDEO<S>, or VIDEO sync signal is lost.
[Description]
DPM: Acronym for Display Power Management
NOTE:
The default power management settings (power savers) for RGB and VIDEO are ON.
Power button
or
Power button
Wireless remote
control
Downloaded From | |
|
